Youtube videos click here
Category: RDF
Customer’s CL35 Pump Fed Installation.
Winter Shut Down due to cold icing weather. Customer was getting ready to run it again.
Replacement Fuse
Inside the Controller there are one fuse for each outlet plug. Each fuse is approximately 10-16amp. These fuse are the slow bow and time delay, they are not the same at Home Depot fuses, if you need to obtain the replacement fuse, please contact us or it can be purchase here Replacement Fuse Purchase
NEW SeaSide Entry C25 Combi Filter
Click Here for PDF Drawing
Gravity / Pump Fed Mode
Picture below is the regular gravity mode To change to pump fed mode, you need to change the jumpers in area labeled (location 1) making sure you have the jumpers in the same horizontal order from left to right. Then move the purple and black wire like the area labeled (location 2) THE BELOW PICGTURE…
Adjust the replay
For Gravity System: Use a small flat screw driver, turn E-2 clockwise to the end For Pump Fed: Use a small flat screw driver, turn E-4 clockwise to the end